What is this?

This knowledgebase contains questions and answers about PRTG Network Monitor and network monitoring in general.

Learn more

PRTG Network Monitor

Intuitive to Use. Easy to manage.
More than 500,000 users rely on Paessler PRTG every day. Find out how you can reduce cost, increase QoS and ease planning, as well.

Free Download

Top Tags


View all Tags

LSI Megaraid 9260-4i monitoring at 2012r2

Votes:

0

Hi there,

I´m running Win 2012r2 on a LSI MegaRaid 9260-4i hardware and trying to monitor HDD status.

The SNMP-driver has been installed and I also opened the incomming snmp-ports at win-firewall.

When running your snmp-tester I got following output:

----------------------- New Test -----------------------
Paessler SNMP Tester 5.2.3 Computername: SRV02 Interface: (192.168.200.19, <WAN-IP>)
30.04.2018 16:06:02 (3 ms) : Device: 192.168.200.19
30.04.2018 16:06:02 (5 ms) : SNMP V1
30.04.2018 16:06:02 (6 ms) : Custom OID 1.3.6.1.4.1
30.04.2018 16:06:04 (2018 ms) : SNMP Datatype: ASN_PRIMITIVE
30.04.2018 16:06:04 (2020 ms) : -------
30.04.2018 16:06:04 (2022 ms) : Value: No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (SNMP error # -2003)
30.04.2018 16:06:04 (2023 ms) : Done

Any further ideas on how to get the controller status?

lsi megaraid snmp snmp-custom-sensor

Created on Apr 30, 2018 2:15:20 PM

Last change on Apr 30, 2018 8:20:13 PM by Stephan Linke [Paessler Support]



7 Replies

Votes:

0

SNMP enabled in the Windows features as well as allowed PRTG as a host within the service configuration?

Kind regards,
Stephan Linke, Tech Support Team

Created on Apr 30, 2018 8:21:13 PM by Stephan Linke [Paessler Support]



Votes:

0

now, SNMP is activated as feature but I think, it´s not working correct...

----------------------- New Test ----------------------- Paessler SNMP Tester 5.2.3 Computername: SRV02 Interface: (192.168.200.19, 78.46.41.213) 30.04.2018 22:39:12 (3 ms) : Device: 192.168.200.19 30.04.2018 22:39:12 (4 ms) : SNMP V1 30.04.2018 22:39:12 (5 ms) : Custom OID 1.3.6.1.4.1 30.04.2018 22:39:12 (7 ms) : SNMP Datatype: ASN_NULL 30.04.2018 22:39:12 (9 ms) : ------- 30.04.2018 22:39:12 (10 ms) : Value: NULL2 30.04.2018 22:39:12 (12 ms) : Done

Value "Null2" seems to be wrong, isn´t it?

Created on Apr 30, 2018 9:12:52 PM



Votes:

0

Is the software configured for SNMPv1 or SNMPv2c?

Do you have port 161 open on the firewall?

Created on May 1, 2018 4:49:06 AM by Benjamin Day [Paessler Support] (1,441) ●2 ●1



Votes:

0

yes, it´s open

regardless, which snmp-version I run it won´t work:

v1: Value: NULL2 v2c: Value: No such object (SNMP error #222) v3: Value: no response

Created on May 1, 2018 4:22:30 PM



Votes:

0

OK, so with v1, it atleast returns a Null Value. V2c errors out.

Was this included with the server? Who is the vendor?

Created on May 1, 2018 6:55:55 PM by Benjamin Day [Paessler Support] (1,441) ●2 ●1



Votes:

0

it´s a machine hosted at Hetzner Datacenter where I don´t have physical access. I don´t know in detail, which hardware is used :(

Created on May 1, 2018 6:57:37 PM



Votes:

0

Ok, so you loaded a driver for the hardware to support SNMP.

Does the vendor that supplied you with the driver have OIDs?

Created on May 3, 2018 5:49:40 AM by Benjamin Day [Paessler Support] (1,441) ●2 ●1




Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.