snmp tester 3.2 unable to get sysObjectID/1.3.6.1.2.1.1.2.0

Hello,

can you access this OID on this particular host with any other SNMP Tool (snmpget, snmpwalk, netsnmp)?

best regards.

Hi,

Yes :"It's working for many other OIDs with this software, and this sysObjID return a value for the tested devices with another software." The comparative testing software is NetworkScanner from SoftPerfect.

Bye.

hallo,

what device are you scanning against?

did you try the single get, force 32bit options in the tester yet?

Hi,

Devices tested was :
. Cisco / WS-C3560-48PS / 12.2(55)SE1
. Entearsys / B2H124-48P / 4.02.12.0006
. HPN / E3500yl-24G / K.15.04.0003

I just test it with 32bit and single get without any change, anytime :

----------------------- New Test -----------------------
Paessler SNMP Tester 3.2
Device: 172.21.0.x

16/05/2011 14:10:25 (7 ms) : Start using SNMP V1
16/05/2011 14:10:25 (15 ms) : -------
16/05/2011 14:10:25 (17 ms) : Value: 
16/05/2011 14:10:25 (19 ms) : Done

Using Netscan SysoObjID result :
. Cisco 1.3.6.1.4.1.9.1.564
. Enterasys 1.3.6.1.4.1.5624.2.2.318
. HP 1.3.6.1.4.1.11.2.3.7.11.58

Bye,

What type of value is this OID supposed to return? Certain return values, such as tables, double-index and trap values are not compatible with SNMP Tester.

hi,

The result is only an "OID" as already shown inmy past message: . Cisco 1.3.6.1.4.1.9.1.564 . Enterasys 1.3.6.1.4.1.5624.2.2.318 . HP 1.3.6.1.4.1.11.2.3.7.11.58

I just try on a Fortigate 60 and the result is the same, but i do a packet capture and the get-response is send by the device. "1.3.6.1.2.1.1.2.0: 1.3.6.1.4.1.12356.600 (iso.3.6.1.4.1.12356.600)"

Have you tried it by yourself ?

Regards,

Bye,

What are your results if you walk the 1.3.6.1.4.1.4242 base? Does it list underlying OIDs?

Hi,

Sorry but i don't understand your last post, i do not have such vendor in my devices so i can't read (snmp-walk) this private OID. According to http://www.iana.org/assignments/enterprise-numbers OID 4242 is : 4242 The Clorox Company Paul Rarey Paul.Rarey&Clorox.com

Regards.

Hi,

Do you have any news regarding my last reply ? This OID is a private branch and i cannot us it with my devices.

Bye.

Hi,

Finally i have my reply, is it working as expected using the last 5.0beta.

Thanks .

----------------------- New Test ----------------------- Paessler SNMP Tester 5.0 (Beta10) 16/04/2013 17:36:13 (4 ms) : Device: 10.191.169.50 16/04/2013 17:36:13 (6 ms) : SNMP V1 16/04/2013 17:36:13 (8 ms) : Custom OID 1.3.6.1.2.1.1.2.0 16/04/2013 17:36:13 (17 ms) : ------- 16/04/2013 17:36:13 (19 ms) : Value: 1.3.6.1.4.1.5596.160.6.4.1 16/04/2013 17:36:13 (22 ms) : Done