What is this?

This knowledgebase contains questions and answers about PRTG Network Monitor and network monitoring in general.

Learn more

PRTG Network Monitor

Intuitive to Use. Easy to manage.
More than 500,000 users rely on Paessler PRTG every day. Find out how you can reduce cost, increase QoS and ease planning, as well.

Free Download

Top Tags


View all Tags

How i can monitor CRC errors on Cisco Routers 2821

Votes:

0

I want to know that my network link work properly. Maybe you have other suggestions.

cisco-router crc crc-errors

Created on Sep 27, 2011 1:52:07 PM



Best Answer

Accepted Answer

Votes:

0

CRC errors can be obtained with locIfInCRC in the OLD-CISCO-INTERFACES-MIB (OID 1.3.6.1.4.1.9.2.2.1.1.12)

locIfInCRC OBJECT-TYPE
                   SYNTAX  INTEGER
                   ACCESS  read-only
                   STATUS  mandatory
                   DESCRIPTION
                           "Number of input packets which had cyclic
                           redundancy checksum errors."
                   ::= { lifEntry 12 }

Created on Sep 29, 2011 10:00:42 AM



4 Replies

Votes:

0

Hello,

have you checked the "Additional Channels" on the SNMP Traffic Sensors? Maybe this does already help. Otherwise it might be necessary to import MIBs from the vendor with our MIB Importer to check these values.

best regards.

Created on Sep 27, 2011 2:38:53 PM by  Torsten Lindner [Paessler Support]



Accepted Answer

Votes:

0

CRC errors can be obtained with locIfInCRC in the OLD-CISCO-INTERFACES-MIB (OID 1.3.6.1.4.1.9.2.2.1.1.12)

locIfInCRC OBJECT-TYPE
                   SYNTAX  INTEGER
                   ACCESS  read-only
                   STATUS  mandatory
                   DESCRIPTION
                           "Number of input packets which had cyclic
                           redundancy checksum errors."
                   ::= { lifEntry 12 }

Created on Sep 29, 2011 10:00:42 AM



Votes:

0

thanks very much for help

Created on Sep 29, 2011 1:37:24 PM



Votes:

0

You might be able to monitor CRC errors also with the SNMP RMON Sensor if your device provides traffic data via Remote Monitoring (RMON).

Created on Jan 23, 2014 5:53:05 PM by  Gerald Schoch [Paessler Support]




Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.