What is this?

This knowledgebase contains questions and answers about PRTG Network Monitor and network monitoring in general.

Learn more

PRTG Network Monitor

Intuitive to Use. Easy to manage.
More than 500,000 users rely on Paessler PRTG every day. Find out how you can reduce cost, increase QoS and ease planning, as well.

Free Download

Top Tags

View all Tags

Dell Server PVNX3000 SNMP Dell Hardware



I have bunch of Dell Servers Poweredge 2950 which have Remote Probe installed and are working fine when I add the Dell SNMP Sensor

But this one Dell server PVNX3000 with remote probe, and has snmp installed does not work when I try to add a Dell Sensor SNMP

local core

I get this error:

No available interfaces on this device (code: PE049)

dell prtg snmp

Created on Feb 16, 2012 3:39:10 AM

4 Replies



hallo, please try our free SNMP Tester and scan for available interfaces on the server.

what do you get?


Created on Feb 16, 2012 6:39:44 AM by  Aurelio Lombardi [Paessler Support]



Here is what I get:

2/16/2012 12:56:21 PM (1 ms) : Start using SNMP V1 2/16/2012 12:56:31 PM (10003 ms) : ------- 2/16/2012 12:56:31 PM (10004 ms) : Value: No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (SNMP error # -2003) 2/16/2012 12:56:31 PM (10004 ms) : Done

And also I get that same thing on my good working snmp btw.

I checked the SNMP Service everything is looking good like other working dell servers. I even turned off firewall still same error.

Created on Feb 16, 2012 8:54:36 PM



Actually i didnt use localhost for device ip:

Here are results:

Paessler SNMP Tester 3.2 Device: localhost

2/16/2012 12:59:37 PM (1 ms) : Start using SNMP V1 2/16/2012 12:59:37 PM (3 ms) : ------- 2/16/2012 12:59:37 PM (3 ms) : Value: 0 2/16/2012 12:59:37 PM (3 ms) : Done

and for 64bit :

Paessler SNMP Tester 3.2 Device: localhost

2/16/2012 1:00:05 PM (3 ms) : Start using SNMP V2c 2/16/2012 1:00:05 PM (6 ms) : ------- 2/16/2012 1:00:05 PM (7 ms) : Value: No Such Name (SNMP error # 2) 2/16/2012 1:00:05 PM (7 ms) : Done

Created on Feb 16, 2012 8:57:12 PM



got it working thanks!

Created on Feb 16, 2012 9:07:12 PM

Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.