New Question
 
 
PRTG Network Monitor

Intuitive to Use.
Easy to manage.

150.000 administrators have chosen PRTG to monitor their network. Find out how you can reduce cost, increase QoS and ease planning, as well.

Free PRTG
Download >>

 

What is this?

This knowledgebase contains questions and answers about PRTG Network Monitor and network monitoring in general. You are invited to get involved by asking and answering questions!

Learn more

 

Top Tags


View all Tags


Which lookup values are supported by the SNMP HP ProLiant Memory Controller Sensor?

Votes:

0

Your Vote:

Up

Down

Is there an overview available which lookup values the SNMP HP Proliant Memory Controller sensor supports?

help hp memory proliant prtg snmp snmp-sensor

Created on Dec 13, 2012 5:24:26 PM by  Gerald Schoch [Paessler Support]

Last change on Dec 14, 2012 8:43:59 AM by  Daniel Zobel [Paessler Support]



1 Reply

Accepted Answer

Votes:

1

Your Vote:

Up

Down

This article applies to PRTG Network Monitor 12 or later

Lookup values for the SNMP HP ProLiant Memory Controller

All possible error status values of the Advanced Memory Protection board, or cartridge, or riser are listed with their descriptions below:

Status TextStatus Integer CodeMeaning
other1The value is unsupported or could not be determined.
noError2The board or cartridge or riser is configured and operating correctly.
dimmEccError3The board or cartridge or riser has at least one DIMM ECC error.
unlockError4The board or cartridge or riser is unlocked when it should not be. Please insure the board of cartridge is locked.
configError5The board or cartridge or riser has a bad memory configuration. Please insure all memory modules are of the correct type, speed, latency, etc.
busError6The board or cartridge or riser has a memory bus error. Please insure all memory modules are of the correct type, speed, latency, etc. Also insure the cartridge is inserted properly.
powerError7The board or cartridge or riser has power error. Please insure all memory modules are of the correct type, speed, latency, etc. Also insure the cartridge is inserted properly.
advancedEcc8The board or cartridge or riser is configured for advanced Ecc mode.
onlineSpare9The board or cartridge or riser is configured for Online Spare mode.
mirrored10The board or cartridge or riser is configured for mirrored mode.
mirroredDimmError11The board or cartridge or riser has a mirrored Dimm error.
memoryRaid12The board or cartridge or riser is configured for memory raid mode.
raidDimmError13The board or cartridge or riser has a raid Dimm error.
lockStep14The board or cartridge or riser is configured for lockStep mode.
lockStepError15The board or cartridge or riser has a lockStep Dimm error.

These conditions provide the current status of the Advanced Memory Protection memory board, or cartridge, or riser.

See Also

Created on Dec 13, 2012 5:43:40 PM by  Gerald Schoch [Paessler Support]

Last change on Dec 19, 2012 1:54:18 PM by  Daniel Zobel [Paessler Support]



Please log in or register to enter your reply.


Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.