This article applies as of PRTG 22
Lookup values for the SNMP HPE ProLiant Memory Controller sensor
All possible Error status values of the Advanced Memory Protection board, or cartridge, or riser, are listed with their descriptions below:
Status Text | Status Integer Code | Meaning |
other | 1 | The value is unsupported or could not be determined. |
noError | 2 | The board or cartridge or riser is configured and operating correctly. |
dimmEccError | 3 | The board or cartridge or riser has at least one DIMM ECC error. |
unlockError | 4 | The board or cartridge or riser is unlocked when it should not be. Ensure that the board of cartridge is locked. |
configError | 5 | The board or cartridge or riser has a bad memory configuration. Ensure that all memory modules are of the correct type, speed, latency, etc. |
busError | 6 | The board or cartridge or riser has a memory bus error. Ensure that all memory modules are of the correct type, speed, latency, etc. Also ensure the cartridge is inserted properly. |
powerError | 7 | The board or cartridge or riser has power error. Ensure that all memory modules are of the correct type, speed, latency, etc. Also ensure the cartridge is inserted properly. |
advancedEcc | 8 | The board or cartridge or riser is configured for advanced Ecc mode. |
onlineSpare | 9 | The board or cartridge or riser is configured for Online Spare mode. |
mirrored | 10 | The board or cartridge or riser is configured for mirrored mode. |
mirroredDimmError | 11 | The board or cartridge or riser has a mirrored Dimm error. |
memoryRaid | 12 | The board or cartridge or riser is configured for memory raid mode. |
raidDimmError | 13 | The board or cartridge or riser has a raid Dimm error. |
lockStep | 14 | The board or cartridge or riser is configured for lockStep mode. |
lockStepError | 15 | The board or cartridge or riser has a lockStep Dimm error. |
These conditions provide the current status of the Advanced Memory Protection memory board, or cartridge, or riser.
More
Add comment