What is this?

This knowledgebase contains questions and answers about PRTG Network Monitor and network monitoring in general.

Learn more

PRTG Network Monitor

Intuitive to Use. Easy to manage.
More than 500,000 users rely on Paessler PRTG every day. Find out how you can reduce cost, increase QoS and ease planning, as well.

Free Download

Top Tags


View all Tags

Please enter a valid OID value when setting up custom SNMP

Votes:

0

We have some custom SNMP flags which work from snmpwalk:

snmpwalk -v 2c -O n -c snmp-pub localhost .1.3.6.1.4.1.8072.1.3.2.3.1.4.16.100.97.105.108.121.45.113.117.111.116.101.115.45.114.97.110
.1.3.6.1.4.1.8072.1.3.2.3.1.4.16.100.97.105.108.121.45.113.117.111.116.101.115.45.114.97.110 = INTEGER: 1

However when trying to enter in this OID to PRTG it brings up the error:

Please enter a valid OID value (e.g. 1.3.6.1.2.1.1.3.0)

custom oid prtg snmp

Created on Jan 9, 2013 11:54:43 PM

Last change on Jan 10, 2013 6:44:11 AM by  Konstantin Wolff [Paessler Support]



5 Replies

Votes:

0

Hi,
please try providing the OID without the leading .. Then you should be able to use the same.
Best regards

Created on Jan 10, 2013 6:43:54 AM by  Konstantin Wolff [Paessler Support]

Last change on Jan 10, 2013 6:44:29 AM by  Konstantin Wolff [Paessler Support]



Votes:

0

Hi, There is some problem with valid OID "0.1.3.6.1.4.1.21287.16.1.0" in PRTG. I tested trial version PRTG 12 in last month and all worked OK, but in next version PRTG 13 of its OID is not valid.

Created on Jan 22, 2013 9:58:13 AM



Votes:

0

The leading "0" seems off. Please try with "1.3.6.1.4.1.21287.16.1.0". If that doesn't work, please check the OID using our SNMP Tester. Does that yield a result?

Created on Jan 22, 2013 12:52:55 PM by  Patrick Hutter [Paessler Support] (7,225) 3 3



Votes:

0

Hi, I have to read SNMP parameters of thermometer (http://www.mikrovlny.cz/cz/produkt/64) and there are producer's MIB Information, SNMP v.1: GET Temperature on Input1 - 0.1.3.6.1.4.1.21287.16.1.0 GET Temperature on Input2 - 0.1.3.6.1.4.1.21287.16.2.0

I tried SNMP Tester and result is clear: - When OID is "0.1.3.6.1.4.1.21287.16.1.0" test value is 22.5 (Device1 Tepmperature):

----------------------- New Test -----------------------
Paessler SNMP Tester 3.2
Device: 192.168.2.45
23.1.2013 8:18:46 (1 ms) : Start using SNMP V1
23.1.2013 8:18:46 (35 ms) : -------
23.1.2013 8:18:46 (35 ms) : Value: 22.5
23.1.2013 8:18:46 (35 ms) : Done

and - When OID is "1.3.6.1.4.1.21287.16.1.0" or ".1.3.6.1.4.1.21287.16.1.0" test value FAILED:

----------------------- New Test -----------------------
Paessler SNMP Tester 3.2
Device: 192.168.2.45
23.1.2013 8:18:56 (1 ms) : Start using SNMP V1
23.1.2013 8:18:56 (24 ms) : -------
23.1.2013 8:18:56 (24 ms) : Value: No Such Name (SNMP error # 2)
23.1.2013 8:18:56 (25 ms) : Done

Help me please. What can I do?

Created on Jan 23, 2013 7:41:58 AM

Last change on Jan 23, 2013 2:25:14 PM by  Torsten Lindner [Paessler Support]



Votes:

0

In the moment it is not possible to enter such OIDs (that do not start with 1.3.6.1) in PRTG, we will improve this in the next Canary Buids, but it will take some weeks until this gets into the Stable branch. Please bear with us.

Created on Jan 23, 2013 3:16:20 PM by  Torsten Lindner [Paessler Support]




Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.