What is this?

This knowledgebase contains questions and answers about PRTG Network Monitor and network monitoring in general.

Learn more

PRTG Network Monitor

Intuitive to Use. Easy to manage.
More than 500,000 users rely on Paessler PRTG every day. Find out how you can reduce cost, increase QoS and ease planning, as well.

Free Download

Top Tags

View all Tags

SNMP configuration



Hello, don't really know if it is the appropriate place to ask this question, but i was troubleshooting my snmp configuration between a windows server 2008 and a network device using your SNMP Tester v5 beta, and i found this error :

Value: No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (SNMP error # -2003)

don't know what should i do to resolvethat problem please... thanks in advance.

network-configuration snmp windows-server-2008

Created on Mar 23, 2013 9:32:33 AM

1 Reply



there are some things you might want to check when receiving this error message. Please check if the SNMP Service is up, running and properly configured on the target device. Additional, please make sure no firewall is blocking the access to port 161 and if a firewall is in between the tester and the target make sure UDP traffic from tester to target is allowed in port 161.
Best regards

Created on Mar 25, 2013 8:33:43 AM by  Konstantin Wolff [Paessler Support]

Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.