can you help me with importing mib file? (Paessler MIB Importer V2) When i clik "import", it gives a lot of errors. pls help me :)
NATEKS-FlexGain-TDMoIP-MIB DEFINITIONS ::= BEGIN
IMPORTS
mgmt, enterprises, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks
FROM RFC1155-SMI
DisplayString FROM RFC1213-MIB
TRAP-TYPE FROM RFC-1215
OBJECT-TYPE FROM RFC-1212
Nateks OBJECT IDENTIFIER
::= { enterprises 4249 }
NateksProducts OBJECT IDENTIFIER
::= { Nateks 1 }
FlexGain-TDMoIP MODULE-IDENTITY
LAST-UPDATED "200711131238Z"
ORGANIZATION "Nateks."
CONTACT-INFO "Nateks.
Postal: 115516, Veselaya, 10-1, Moscow, Russia
E-mail: [email protected]
Tel: +7 (495) 231-1624 325-18-34.
Fax: +7 (495) 325-2293."
DESCRIPTION "The Structure of Management Information for FlexGain-TDMoIP of Nateks.
Initial version of this MIB module.
This SMI defines the managed objects for FlexGain-TDMoIP.
TDMoIP modules enable TDM E1 circuits and RS232 serial data to be extended
over Packet Switched Networks. The devices convert the data stream coming
from the TDM ports into configurable-sized IP packets that are transported
over the Ethernet port."
::= { NateksProducts 15 }
FlexGain-TDMoIP-PerformanceMgt OBJECT-IDENTITY
STATUS current
DESCRIPTION "FlexGain-TDMoIP-PerformanceMgt is the root object identifier of
Performance management related objects."
::= { FlexGain-TDMoIP 1 }
FlexGain-TDMoIP-ConfigurationMgt OBJECT-IDENTITY
STATUS current
DESCRIPTION "FlexGain-TDMoIP-ConfigurationMgt is the root object identifier of
Configuration Management related objects."
::= { FlexGain-TDMoIP 2 }
FlexGain-TDMoIP-MaintenanceMgt OBJECT-IDENTITY
STATUS current
DESCRIPTION "FlexGain-TDMoIP-MaintenanceMgt is the root object identifier of
Fault and maintenance management related objects."
::= { FlexGain-TDMoIP 3 }
FlexGain-TDMoIP-TrapMgt OBJECT IDENTIFIER
::= { FlexGain-TDMoIP 4 }
--**************************************************************************************************
--*** ***
--*** FlexGain-TDMoIP Fault And Maintenance Management Section ***
--*** ***
--**************************************************************************************************
sysInfo OBJECT IDENTIFIER ::= { FlexGain-TDMoIP-MaintenanceMgt 1 }
--snmpInfo OBJECT IDENTIFIER ::= { FlexGain-TDMoIP-MaintenanceMgt 5 }
sysInfoModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION "Model name, for example FlexGain-TDMoIP-4xE1. It is mandatory
that this only contain printable ASCII characters."
::= { sysInfo 1 }
sysInfoId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS optional
DESCRIPTION "Device ID, displayed in the main menu of the module. It is mandatory
that this only contain printable ASCII characters."
::= { sysInfo 2 }
sysInfoHardwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION "Version of the device's hardware. For examle: 1.0."
::= { sysInfo 3 }
sysInfoSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS optional
DESCRIPTION "Version of the device's main software
For examle: 3.5.0.5.9."
::= { sysInfo 4 }
sysInfoModuleType OBJECT-TYPE
SYNTAX INTEGER {
subrack(1),
standalone(2),
standalone-small(3),
rackmount(4)
}
ACCESS read-only
STATUS optional
DESCRIPTION "Module type"
::= { sysInfo 5 }
sysInfoSubrackAddress OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-only
STATUS optional
DESCRIPTION "Address of the module in the FlexGain cassette. For modules that
do not have such an address, a value of 0 is returned."
::= { sysInfo 6 }
systemAlarm OBJECT-TYPE
SYNTAX INTEGER {
no(1),
nonUrgent(2),
urgent(3),
urgentAndNonurgent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Device alarm state"
::= { FlexGain-TDMoIP-MaintenanceMgt 2 }
systemReset OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
readValue(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Writing reset(1) to maintReset perform a restart of the device.
Read always returns readValue(2)."
::= { FlexGain-TDMoIP-MaintenanceMgt 3 }
systemDefault OBJECT-TYPE
SYNTAX INTEGER {
defaultEth(0),
defaultTDM(1),
readValue(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Writing defaultEth(0) or defaultTDM(1) to set default Ethernet and TDM
configurations of the device. Read always returns readValue(2)."
::= { FlexGain-TDMoIP-MaintenanceMgt 4 }
--configSNMPUserName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(6))
-- ACCESS read-write
-- STATUS optional
-- DESCRIPTION
-- "SNMP user name. After entering command,
-- you will be asked to enter user name. Please note, that SNMP user
-- name is case sensitive."
-- ::= { snmpInfo 1 }
--
--configSNMPUserName OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(6))
-- ACCESS read-write
-- STATUS optional
-- DESCRIPTION
-- "SNMP user name. After entering command,
-- you will be asked to enter user name. Please note, that SNMP user
-- name is case sensitive."
-- ::= { snmpInfo 2 }
--
--configSNMPPassword OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(16))
-- ACCESS read-write
-- STATUS optional
-- DESCRIPTION
-- "SNMP password. After entering command, you will be asked to enter password.
-- Please note, that SNMP access password is case sensitive."
-- ::= { snmpInfo 3 }
--
--configSNMPTrapIP OBJECT-TYPE
-- SYNTAX IpAddress
-- ACCESS read-write
-- STATUS optional
-- DESCRIPTION
-- "IP addresses to send SNMP traps to. Device maintains
-- list of IP addresses to send SNMP traps to, and a maximum of 2 addresses is
-- allowed."
-- ::= { snmpInfo 4 }
--
--configSNMPTrapIP2 OBJECT-TYPE
-- SYNTAX IpAddress
-- ACCESS read-write
-- STATUS optional
-- DESCRIPTION
-- "IP addresses to send SNMP traps to. Device maintains
-- list of IP addresses to send SNMP traps to, and a maximum of 2 addresses is
-- allowed."
-- ::= { snmpInfo 5 }
--**************************************************************************************************
--*** ***
--*** FlexGain-TDMoIP P e r f o m a n c e M a n a g e m e n t S e c t i o n ***
--*** ***
--**************************************************************************************************
StatTDMoIP OBJECT IDENTIFIER ::= { FlexGain-TDMoIP-PerformanceMgt 1 }
StatE1 OBJECT IDENTIFIER ::= { FlexGain-TDMoIP-PerformanceMgt 2 }
StatEth OBJECT IDENTIFIER ::= { FlexGain-TDMoIP-PerformanceMgt 3 }
StatRS232 OBJECT IDENTIFIER ::= { FlexGain-TDMoIP-PerformanceMgt 4 }
--StatE1Info
--StatEthInfo
--StatRS232Info
--**************************************************************************************************
-- T D M o I P I n f o s e c t i o n
--**************************************************************************************************
----------------------------------------------------------------
-- Port1 bundle statistics
----------------------------------------------------------------
port1-statTDMoIPBndlTable OBJECT-TYPE
SYNTAX SEQUENCE OF Port1-StatTDMoIPBndlEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "A table contains port1 bundles statistics. Each row consists of an the bundle index,
bundle state (open or close), bundle activity (active or idle) and
transmitted/received packets to the bundle."
::= { StatTDMoIP 1 }
Port1-StatTDMoIPBndlEntry ::=
SEQUENCE {
port1-statTDMoIPBndlIndex INTEGER,
port1-statTDMoIPBndlState INTEGER,
port1-statTDMoIPBndlStatus INTEGER,
port1-statTDMoIPTxPackets Counter32,
port1-statTDMoIPRxPackets Counter32,
port1-statTDMoIPRxLostPackets Counter32,
port1-statTDMoIPRxAAL1SnErrors Counter32,
port1-statTDMoIPRxUnderrunEvents Counter32
}
port1-statTDMoIPBndlEntry OBJECT-TYPE
SYNTAX Port1-StatTDMoIPBndlEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "Bundles statistics."
INDEX { ifIndex }
::= { port1-statTDMoIPBndlTable 1 }
port1-statTDMoIPBndlIndex OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS optional
DESCRIPTION "A unique index of bundle."
::= { port1-statTDMoIPBndlEntry 1 }
port1-statTDMoIPBndlState OBJECT-TYPE
SYNTAX INTEGER { Closed(0), Opened(1) }
ACCESS read-only
STATUS optional
DESCRIPTION "The bundle state (open or close)."
::= { port1-statTDMoIPBndlEntry 2 }
port1-statTDMoIPBndlStatus OBJECT-TYPE
SYNTAX INTEGER { Idle(0), Active(1) }
ACCESS read-only
STATUS optional
DESCRIPTION "The bundle connection status. The bundle connection status provides
information about the integrity of the TDMoIP connection."
::= { port1-statTDMoIPBndlEntry 3 }
port1-statTDMoIPTxPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of sent packets by bundle."
::= { port1-statTDMoIPBndlEntry 4 }
port1-statTDMoIPRxPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of received packets by bundle."
::= { port1-statTDMoIPBndlEntry 5 }
port1-statTDMoIPRxLostPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of packets lost for this bundle."
::= { port1-statTDMoIPBndlEntry 6 }
port1-statTDMoIPRxAAL1SnErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of AAL1 sequence number errors got by bundle."
::= { port1-statTDMoIPBndlEntry 7 }
port1-statTDMoIPRxUnderrunEvents OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of underrun events got by bundle at the receive side."
::= { port1-statTDMoIPBndlEntry 8 }
----------------------------------------------------------------
-- Port2 bundle statistics
----------------------------------------------------------------
port2-statTDMoIPBndlTable OBJECT-TYPE
SYNTAX SEQUENCE OF Port2-StatTDMoIPBndlEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "A table contains port1 bundles statistics. Each row consists of an the bundle index,
bundle state (open or close), bundle activity (active or idle) and
transmitted/received packets to the bundle."
::= { StatTDMoIP 2 }
Port2-StatTDMoIPBndlEntry ::=
SEQUENCE {
port2-statTDMoIPBndlIndex INTEGER,
port2-statTDMoIPBndlState INTEGER,
port2-statTDMoIPBndlStatus INTEGER,
port2-statTDMoIPTxPackets Counter32,
port2-statTDMoIPRxPackets Counter32,
port2-statTDMoIPRxLostPackets Counter32,
port2-statTDMoIPRxAAL1SnErrors Counter32,
port2-statTDMoIPRxUnderrunEvents Counter32
}
port2-statTDMoIPBndlEntry OBJECT-TYPE
SYNTAX Port2-StatTDMoIPBndlEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "Bundles statistics."
INDEX { ifIndex }
::= { port2-statTDMoIPBndlTable 1 }
port2-statTDMoIPBndlIndex OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS optional
DESCRIPTION "A unique index of bundle."
::= { port2-statTDMoIPBndlEntry 1 }
port2-statTDMoIPBndlState OBJECT-TYPE
SYNTAX INTEGER { Closed(0), Opened(1) }
ACCESS read-only
STATUS optional
DESCRIPTION "The bundle state (open or close)."
::= { port2-statTDMoIPBndlEntry 2 }
port2-statTDMoIPBndlStatus OBJECT-TYPE
SYNTAX INTEGER { Idle(0), Active(1) }
ACCESS read-only
STATUS optional
DESCRIPTION "The bundle connection status. The bundle connection status provides
information about the integrity of the TDMoIP connection."
::= { port2-statTDMoIPBndlEntry 3 }
port2-statTDMoIPTxPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of sent packets by bundle."
::= { port2-statTDMoIPBndlEntry 4 }
port2-statTDMoIPRxPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of received packets by bundle."
::= { port2-statTDMoIPBndlEntry 5 }
port2-statTDMoIPRxLostPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of packets lost for this bundle."
::= { port2-statTDMoIPBndlEntry 6 }
port2-statTDMoIPRxAAL1SnErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of AAL1 sequence number errors got by bundle."
::= { port2-statTDMoIPBndlEntry 7 }
port2-statTDMoIPRxUnderrunEvents OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of underrun events got by bundle at the receive side."
::= { port2-statTDMoIPBndlEntry 8 }
----------------------------------------------------------------
-- Port3 bundle statistics
----------------------------------------------------------------
port3-statTDMoIPBndlTable OBJECT-TYPE
SYNTAX SEQUENCE OF Port3-StatTDMoIPBndlEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "A table contains port1 bundles statistics. Each row consists of an the bundle index,
bundle state (open or close), bundle activity (active or idle) and
transmitted/received packets to the bundle."
::= { StatTDMoIP 3 }
Port3-StatTDMoIPBndlEntry ::=
SEQUENCE {
port3-statTDMoIPBndlIndex INTEGER,
port3-statTDMoIPBndlState INTEGER,
port3-statTDMoIPBndlStatus INTEGER,
port3-statTDMoIPTxPackets Counter32,
port3-statTDMoIPRxPackets Counter32,
port3-statTDMoIPRxLostPackets Counter32,
port3-statTDMoIPRxAAL1SnErrors Counter32,
port3-statTDMoIPRxUnderrunEvents Counter32
}
port3-statTDMoIPBndlEntry OBJECT-TYPE
SYNTAX Port3-StatTDMoIPBndlEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "Bundles statistics."
INDEX { ifIndex }
::= { port3-statTDMoIPBndlTable 1 }
port3-statTDMoIPBndlIndex OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS optional
DESCRIPTION "A unique index of bundle."
::= { port3-statTDMoIPBndlEntry 1 }
port3-statTDMoIPBndlState OBJECT-TYPE
SYNTAX INTEGER { Closed(0), Opened(1) }
ACCESS read-only
STATUS optional
DESCRIPTION "The bundle state (open or close)."
::= { port3-statTDMoIPBndlEntry 2 }
port3-statTDMoIPBndlStatus OBJECT-TYPE
SYNTAX INTEGER { Idle(0), Active(1) }
ACCESS read-only
STATUS optional
DESCRIPTION "The bundle connection status. The bundle connection status provides
information about the integrity of the TDMoIP connection."
::= { port3-statTDMoIPBndlEntry 3 }
port3-statTDMoIPTxPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of sent packets by bundle."
::= { port3-statTDMoIPBndlEntry 4 }
port3-statTDMoIPRxPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of received packets by bundle."
::= { port3-statTDMoIPBndlEntry 5 }
port3-statTDMoIPRxLostPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of packets lost for this bundle."
::= { port3-statTDMoIPBndlEntry 6 }
port3-statTDMoIPRxAAL1SnErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of AAL1 sequence number errors got by bundle."
::= { port3-statTDMoIPBndlEntry 7 }
port3-statTDMoIPRxUnderrunEvents OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of underrun events got by bundle at the receive side."
::= { port3-statTDMoIPBndlEntry 8 }
----------------------------------------------------------------
-- Port4 bundle statistics
----------------------------------------------------------------
port4-statTDMoIPBndlTable OBJECT-TYPE
SYNTAX SEQUENCE OF Port4-StatTDMoIPBndlEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "A table contains port1 bundles statistics. Each row consists of an the bundle index,
bundle state (open or close), bundle activity (active or idle) and
transmitted/received packets to the bundle."
::= { StatTDMoIP 4 }
Port4-StatTDMoIPBndlEntry ::=
SEQUENCE {
port4-statTDMoIPBndlIndex INTEGER,
port4-statTDMoIPBndlState INTEGER,
port4-statTDMoIPBndlStatus INTEGER,
port4-statTDMoIPTxPackets Counter32,
port4-statTDMoIPRxPackets Counter32,
port4-statTDMoIPRxLostPackets Counter32,
port4-statTDMoIPRxAAL1SnErrors Counter32,
port4-statTDMoIPRxUnderrunEvents Counter32
}
port4-statTDMoIPBndlEntry OBJECT-TYPE
SYNTAX Port4-StatTDMoIPBndlEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "Bundles statistics."
INDEX { ifIndex }
::= { port4-statTDMoIPBndlTable 1 }
port4-statTDMoIPBndlIndex OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS optional
DESCRIPTION "A unique index of bundle."
::= { port4-statTDMoIPBndlEntry 1 }
port4-statTDMoIPBndlState OBJECT-TYPE
SYNTAX INTEGER { Closed(0), Opened(1) }
ACCESS read-only
STATUS optional
DESCRIPTION "The bundle state (open or close)."
::= { port4-statTDMoIPBndlEntry 2 }
port4-statTDMoIPBndlStatus OBJECT-TYPE
SYNTAX INTEGER { Idle(0), Active(1) }
ACCESS read-only
STATUS optional
DESCRIPTION "The bundle connection status. The bundle connection status provides
information about the integrity of the TDMoIP connection."
::= { port4-statTDMoIPBndlEntry 3 }
port4-statTDMoIPTxPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of sent packets by bundle."
::= { port4-statTDMoIPBndlEntry 4 }
port4-statTDMoIPRxPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of received packets by bundle."
::= { port4-statTDMoIPBndlEntry 5 }
port4-statTDMoIPRxLostPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of packets lost for this bundle."
::= { port4-statTDMoIPBndlEntry 6 }
port4-statTDMoIPRxAAL1SnErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of AAL1 sequence number errors got by bundle."
::= { port4-statTDMoIPBndlEntry 7 }
port4-statTDMoIPRxUnderrunEvents OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Number of underrun events got by bundle at the receive side."
::= { port4-statTDMoIPBndlEntry 8 }
----------------------------------------------------------------
-- Packet statistics reset
----------------------------------------------------------------
statTDMoIPReset OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
readValue(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Writing reset(1) perform a reset of packets statistics.
Read always returns readValue(2)."
::= { StatTDMoIP 5 }
--**************************************************************************************************
-- E1 I n f o s e c t i o n
--**************************************************************************************************
----------------------------------------------------------------
-- Local G826 statistics
----------------------------------------------------------------
localG826StatTable OBJECT-TYPE
SYNTAX SEQUENCE OF LocalG826StatEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "A table contains local G826 statistics for all E1 ports. Each row consists of
an the port index, errored block (EB), errored second (ES), severely errored
second (SSE), background block error (BBE), errored second ratio (ESR), severely
errored second ratio (SESR), background block error ratio (BBER),available
time (AT), unavailable time (UAT)."
::= { StatE1 1 }
LocalG826StatEntry ::=
SEQUENCE {
localG826StatPortIndex INTEGER,
localG826StatEb Counter32,
localG826StatEs Counter32,
localG826StatSes Counter32,
localG826StatBbe Counter32,
localG826StatEsr DisplayString,
localG826StatSesr DisplayString,
localG826StatBber DisplayString,
localG826StatAt Counter32,
localG826StatUat Counter32
}
localG826StatEntry OBJECT-TYPE
SYNTAX LocalG826StatEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "G826 statistics on local side."
INDEX { localG826StatPortIndex }
::= { localG826StatTable 1 }
localG826StatPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS optional
DESCRIPTION "A unique index of E1 Port."
::= { localG826StatEntry 1 }
localG826StatEb OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Errored block (EB): A block in which one or more bits are in error."
::= { localG826StatEntry 2 }
localG826StatEs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Errored second (ES): A one second period with one or more errored blocks.
SES defined below is a subset of ES."
::= { localG826StatEntry 3 }
localG826StatSes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Severely errored second (SSE): A one-second period which contains > 30%
errored blocks or at least one Severely Disturbed Period."
::= { localG826StatEntry 4 }
localG826StatBbe OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Background block error (BBE): An errored block not occurring as part
of an SES."
::= { localG826StatEntry 5 }
localG826StatEsr OBJECT-TYPE
SYNTAX DisplayString (SIZE(16))
ACCESS read-only
STATUS optional
DESCRIPTION "Errored second ratio (ESR): The ratio of ES to total seconds in available
time during a fixed measurement interval."
::= { localG826StatEntry 6 }
localG826StatSesr OBJECT-TYPE
SYNTAX DisplayString (SIZE(16))
ACCESS read-only
STATUS optional
DESCRIPTION "Severely errored second ratio (SESR): The ratio of SES to total seconds
in available time during a fixed measurement interval."
::= { localG826StatEntry 7 }
localG826StatBber OBJECT-TYPE
SYNTAX DisplayString (SIZE(16))
ACCESS read-only
STATUS optional
DESCRIPTION "Background block error ratio (BBER): The ratio of errored blocks to total
blocks during a fixed measurement interval, excluding all blocks during SES
and unavailable time."
::= { localG826StatEntry 8 }
localG826StatAt OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Available Time (AT). A new period of available time begins at the onset of ten
consecutive non-SES events."
::= { localG826StatEntry 9 }
localG826StatUat OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Unavailable Time (UAT). A period of unavailable time begins at the onset of
10 consecutive SES events."
::= { localG826StatEntry 10 }
----------------------------------------------------------------
-- Remote G826 statistics
----------------------------------------------------------------
remoteG826StatTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteG826StatEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "A table contains remote G826 statistics for all E1 ports. Each row consists of
an the port index, errored block (EB), errored second (ES), severely errored
second (SSE), background block error (BBE), errored second ratio (ESR), severely
errored second ratio (SESR), background block error ratio (BBER),available
time (AT), unavailable time (UAT)."
::= { StatE1 2 }
RemoteG826StatEntry ::=
SEQUENCE {
remoteG826StatPortIndex INTEGER,
remoteG826StatEb Counter32,
remoteG826StatEs Counter32,
remoteG826StatSes Counter32,
remoteG826StatBbe Counter32,
remoteG826StatEsr DisplayString,
remoteG826StatSesr DisplayString,
remoteG826StatBber DisplayString,
remoteG826StatAt Counter32,
remoteG826StatUat Counter32
}
remoteG826StatEntry OBJECT-TYPE
SYNTAX RemoteG826StatEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "G826 statistics on remote side."
INDEX { ifIndex }
::= { remoteG826StatTable 1 }
remoteG826StatPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS optional
DESCRIPTION "A unique index of E1 Port."
::= { remoteG826StatEntry 1 }
remoteG826StatEb OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Errored block (EB): A block in which one or more bits are in error."
::= { remoteG826StatEntry 2 }
remoteG826StatEs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Errored second (ES): A one second period with one or more errored blocks.
SES defined below is a subset of ES."
::= { remoteG826StatEntry 3 }
remoteG826StatSes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Severely errored second (SSE): A one-second period which contains > 30%
errored blocks or at least one Severely Disturbed Period."
::= { remoteG826StatEntry 4 }
remoteG826StatBbe OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Background block error (BBE): An errored block not occurring as part
of an SES."
::= { remoteG826StatEntry 5 }
remoteG826StatEsr OBJECT-TYPE
SYNTAX DisplayString (SIZE(16))
ACCESS read-only
STATUS optional
DESCRIPTION "Errored second ratio (ESR): The ratio of ES to total seconds in available
time during a fixed measurement interval."
::= { remoteG826StatEntry 6 }
remoteG826StatSesr OBJECT-TYPE
SYNTAX DisplayString (SIZE(16))
ACCESS read-only
STATUS optional
DESCRIPTION "Severely errored second ratio (SESR): The ratio of SES to total seconds
in available time during a fixed measurement interval."
::= { remoteG826StatEntry 7 }
remoteG826StatBber OBJECT-TYPE
SYNTAX DisplayString (SIZE(16))
ACCESS read-only
STATUS optional
DESCRIPTION "Background block error ratio (BBER): The ratio of errored blocks to total
blocks during a fixed measurement interval, excluding all blocks during SES
and unavailable time."
::= { remoteG826StatEntry 8 }
remoteG826StatAt OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Available Time. A new period of available time begins at the onset of ten
consecutive non-SES events."
::= { remoteG826StatEntry 9 }
remoteG826StatUat OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS optional
DESCRIPTION "Unavailable Time. A period of unavailable time begins at the onset of
10 consecutive SES events."
::= { remoteG826StatEntry 10 }
----------------------------------------------------------------
-- G826 statistics reset
----------------------------------------------------------------
g826Reset OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
readValue(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Writing reset(1) perform a reset of G826 statistics.
Read always returns readValue(2)."
::= { StatE1 3 }
--**************************************************************************************************
--*** ***
--*** FlexGain-TDMoIP C o n f i g u r a t i o n M a n a g e m e n t S e c t i o n ***
--*** ***
--**************************************************************************************************
ConfigTDMoIP OBJECT IDENTIFIER ::= { FlexGain-TDMoIP-ConfigurationMgt 1 }
ConfigE1 OBJECT IDENTIFIER ::= { FlexGain-TDMoIP-ConfigurationMgt 2 }
ConfigE1Port OBJECT IDENTIFIER ::= { ConfigE1 1 }
ConfigE1Bundle OBJECT IDENTIFIER ::= { ConfigE1 2 }
ConfigEth OBJECT IDENTIFIER ::= { FlexGain-TDMoIP-ConfigurationMgt 3 }
ConfigRS232 OBJECT IDENTIFIER ::= { FlexGain-TDMoIP-ConfigurationMgt 4 }
--**************************************************************************************************
-- C o n f i g T D M o I P s e c t i o n
--**************************************************************************************************
configTDMoIPIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS optional
DESCRIPTION "IP address of the TDMoIP interface."
::= { ConfigTDMoIP 1 }
configTDMoIPNetmask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS optional
DESCRIPTION "Subnet mask of the TDMoIP interface."
::= { ConfigTDMoIP 2 }
configTDMoIPGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS optional
DESCRIPTION "Default Gateway for the TDMoIP interface."
::= { ConfigTDMoIP 3 }
--**************************************************************************************************
-- C o n f i g E 1 P o r t s e c t i o n
--**************************************************************************************************
configE1PortNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION "Number of E1 Ports."
::= { ConfigE1Port 1 }
configE1PortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ConfigE1PortEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "A list of E1 Port(s). Each consists of an port identifier, port
framing mode synchronization source, CRC4 mode and idle code."
::= { ConfigE1Port 2 }
configE1PortEntry OBJECT-TYPE
SYNTAX ConfigE1PortEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "E1 Ports Configuration."
INDEX { ifIndex }
::= { configE1PortTable 1 }
ConfigE1PortEntry ::=
SEQUENCE { configE1PortId INTEGER,
configE1PortMode INTEGER,
configE1PortSyncSrc INTEGER,
configE1PortAclkSrc INTEGER,
configE1PortCRC4 INTEGER,
configE1PortIdleCode INTEGER,
configE1PortLocLoop INTEGER,
configE1PortRemLoop INTEGER,
configE1PortOpenBndlNum INTEGER
}
configE1PortId OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS optional
DESCRIPTION "A unique index of E1 Port."
::= { configE1PortEntry 1 }
configE1PortMode OBJECT-TYPE
SYNTAX INTEGER {
Unframed(0),
Framed(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION "Framing mode.
In the unframed mode, the incoming bit stream from port is converted into
IP over Ethernet frames. This option provides clearchannel end-to-end service.
In the framed mode, the incoming bit stream is regarded as a sequence of
n * 64 Kbps channel groups (according to framing). Each predefined group of
channels is converted into a structure block. The structure block is packetized
into IP frames and transmitted. This mode allows transmission of several selected
time slots and not the whole E1 as in unframed mode."
::= { configE1PortEntry 2 }
configE1PortSyncSrc OBJECT-TYPE
SYNTAX INTEGER {
Received(0),
Adaptive(1),
Internal(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION "Synchronization source.
The E1 Transmit (Tx) clock operates in several timing modes, to provide
maximum flexibility for connecting the TDMoIP TDM interface. The available
timing modes are 'Internal', 'Received' and 'Adaptive'."
::= { configE1PortEntry 3 }
configE1PortAclkSrc OBJECT-TYPE
SYNTAX INTEGER (-1..63)
ACCESS read-only
STATUS optional
DESCRIPTION "Adaptive Clock Source (optional).
Identificator (Bundle Id) of a bundle which is the source of adaptive clock.
This parameter has effect when using adaptive timing mode only."
::= { configE1PortEntry 4 }
configE1PortCRC4 OBJECT-TYPE
SYNTAX INTEGER {
Off(0),
On(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION "Cyclic Redundancy Check 4 mode. CRC-4 is a method of checking for errors in
transmitted data that is used on E1 lines. CRC-4 is structured in a multiframe
consisting of 16 frames numbered 0 to 15. To enable generation of CRC4 to
improve data integrity, use the 'CRC4 On' mode. To disable this feature, use
'CRC4 Off' mode."
::= { configE1PortEntry 5 }
configE1PortIdleCode OBJECT-TYPE
SYNTAX INTEGER {
0x54h(84),
0xffh(255),
0x00h(0)
}
ACCESS read-only
STATUS optional
DESCRIPTION "The Idle code. The idle code inserted into unused time slots by TDMoIP at
the transmit path towards E1 equipment."
::= { configE1PortEntry 6 }
configE1PortLocLoop OBJECT-TYPE
SYNTAX INTEGER {
Off(0),
On(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION "The Local Loopback mode. The module can be set to an local loop mode to test."
::= { configE1PortEntry 7 }
configE1PortRemLoop OBJECT-TYPE
SYNTAX INTEGER {
Off(0),
On(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION "The Remote Loopaback mode.
The module can be set to an remote loop mode to test."
::= { configE1PortEntry 8 }
configE1PortOpenBndlNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION "Number of open bundles per E1 port."
::= { configE1PortEntry 9 }
--**************************************************************************************************
-- C o n f i g E 1 B u n d l e s e c t i o n
--**************************************************************************************************
--*************************************
-- first port bundles table
--*************************************
port1-configE1BundleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Port1-ConfigE1BundleEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "A list of E1 Bundles for Port1. Each consists of an bundle ID,
external bundle ID, frame size, jitter bufer size, jitter buffer
data level, destination IP address, timeslots."
::= { ConfigE1Bundle 1 }
port1-configE1BundleEntry OBJECT-TYPE
SYNTAX Port1-ConfigE1BundleEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "Bundles Configuration."
INDEX { ifIndex }
::= { port1-configE1BundleTable 1 }
Port1-ConfigE1BundleEntry ::= SEQUENCE {
port1-configE1BundleId INTEGER,
port1-configE1BundleState INTEGER,
port1-configE1BundleExtId INTEGER,
port1-configE1BundleFrameSize INTEGER,
port1-configE1BundleJBufSize INTEGER,
port1-configE1BundleJBufDataLev INTEGER,
port1-configE1BundleDstIP IpAddress,
port1-configE1BundleTimeslot OCTET STRING,
port1-configE1BundleVID INTEGER,
port1-configE1BundleCoS INTEGER,
port1-configE1BundleIPToS INTEGER
}
port1-configE1BundleId OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS optional
DESCRIPTION "Specific number designated a bundle on the Ethernet Side."
::= { port1-configE1BundleEntry 1 }
port1-configE1BundleState OBJECT-TYPE
SYNTAX INTEGER {
Close(0),
Open(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION "The bundle state (open or close)."
::= { port1-configE1BundleEntry 2 }
port1-configE1BundleExtId OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-only
STATUS optional
DESCRIPTION "External bundle ID. Specific identifier of a destination bundle."
::= { port1-configE1BundleEntry 3 }
port1-configE1BundleFrameSize OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS optional
DESCRIPTION "TDM bytes in frame is equal this value to multiply by 48."
::= { port1-configE1BundleEntry 4 }
port1-configE1BundleJBufSize OBJECT-TYPE
SYNTAX INTEGER (1..512)
ACCESS read-only
STATUS optional
DESCRIPTION "Jitter buffer size. TDMoIP is equipped with a jitter buffer.
The jitter buffer is filled by the incoming IP packets and
emptied out to fill the E1 stream. The buffer begins to empty
out only after it is half-full in order to compensate for packet
starvation from the Ethernet side. The time it takes for half of
the buffer to empty out is the Jitter Buffer Size."
::= { port1-configE1BundleEntry 5 }
port1-configE1BundleJBufDataLev OBJECT-TYPE
SYNTAX INTEGER (1..512)
ACCESS read-only
STATUS optional
DESCRIPTION
"Jitter buffr data level.
Packets are transmitted at set intervals. Jitter Buffer Data Level is the
maximum deviation from the nominal time the packets are expected to arrive
at the far end device."
::= { port1-configE1BundleEntry 6 }
port1-configE1BundleDstIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS optional
DESCRIPTION
"Destination IP address.
IP address of the destination device."
::= { port1-configE1BundleEntry 7 }
port1-configE1BundleTimeslot OBJECT-TYPE
SYNTAX DisplayString (SIZE(128))
ACCESS read-only
STATUS optional
DESCRIPTION
"Time slots is assigned to a bundle."
::= { port1-configE1BundleEntry 8 }
port1-configE1BundleVID OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS optional
DESCRIPTION
"Virtual local area network index for this bundle."
::= { port1-configE1BundleEntry 9 }
port1-configE1BundleCoS OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS optional
DESCRIPTION
"Class of Service (CoS) is a 3 bit field within a layer two Ethernet frame
header when using IEEE 802.1Q. It specifies a priority value of between 0
(signifying best-effort) and 7 (signifying priority real-time data) that
can be used by Quality of Service disciplines to differentiate traffic."
::= { port1-configE1BundleEntry 10 }
port1-configE1BundleIPToS OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS optional
DESCRIPTION
"Internet Protocol Type of Service (IPToS) field of IP header for this bundle"
::= { port1-configE1BundleEntry 11 }
--*************************************
-- second port bundle table
--*************************************
port2-configE1BundleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Port2-ConfigE1BundleEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A list of E1 Bundles for Port2. Each consists of an bundle ID, external bundle ID,
frame size, jitter bufer size, jitter buffer data level,
destination IP address, timeslots."
::= { ConfigE1Bundle 2 }
port2-configE1BundleEntry OBJECT-TYPE
SYNTAX Port2-ConfigE1BundleEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "Bundles Configuration."
INDEX { ifIndex }
::= { port2-configE1BundleTable 1 }
Port2-ConfigE1BundleEntry ::= SEQUENCE {
port2-configE1BundleId INTEGER,
port2-configE1BundleState INTEGER,
port2-configE1BundleExtId INTEGER,
port2-configE1BundleFrameSize INTEGER,
port2-configE1BundleJBufSize INTEGER,
port2-configE1BundleJBufDataLev INTEGER,
port2-configE1BundleDstIP IpAddress,
port2-configE1BundleTimeslot OCTET STRING
port2-configE1BundleVID INTEGER,
port2-configE1BundleCoS INTEGER,
port2-configE1BundleIPToS INTEGER
}
port2-configE1BundleId OBJECT-TYPE
SYNTAX INTEGER (16..31)
ACCESS read-only
STATUS optional
DESCRIPTION
"Specific number designated a bundle on the Ethernet Side."
::= { port2-configE1BundleEntry 1 }
port2-configE1BundleState OBJECT-TYPE
SYNTAX INTEGER {
Close(0),
Open(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The bundle state (open or close)."
::= { port2-configE1BundleEntry 2 }
port2-configE1BundleExtId OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-only
STATUS optional
DESCRIPTION
"External bundle ID.
Specific identifier of a destination bundle."
::= { port2-configE1BundleEntry 3 }
port2-configE1BundleFrameSize OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS optional
DESCRIPTION
"TDM bytes in frame is equal this value to multiply by 48."
::= { port2-configE1BundleEntry 4 }
port2-configE1BundleJBufSize OBJECT-TYPE
SYNTAX INTEGER (1..512)
ACCESS read-only
STATUS optional
DESCRIPTION
"Jitter buffer size.
TDMoIP is equipped with a jitter buffer. The jitter buffer is filled by
the incoming IP packets and emptied out to fill the E1 stream. The buffer
begins to empty out only after it is half-full in order to compensate for
packet starvation from the Ethernet side. The time it takes for half of
the buffer to empty out is the Jitter Buffer Size."
::= { port2-configE1BundleEntry 5 }
port2-configE1BundleJBufDataLev OBJECT-TYPE
SYNTAX INTEGER (1..512)
ACCESS read-only
STATUS optional
DESCRIPTION
"Jitter buffr data level.
Packets are transmitted at set intervals. Jitter Buffer Data Level is the
maximum deviation from the nominal time the packets are expected to
arrive at the far end device."
::= { port2-configE1BundleEntry 6 }
port2-configE1BundleDstIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS optional
DESCRIPTION
"Destination IP address.
IP address of the destination device."
::= { port2-configE1BundleEntry 7 }
port2-configE1BundleTimeslot OBJECT-TYPE
SYNTAX DisplayString (SIZE(128))
ACCESS read-only
STATUS optional
DESCRIPTION
"Time slots is assigned to a bundle."
::= { port2-configE1BundleEntry 8 }
port2-configE1BundleVID OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS optional
DESCRIPTION
"Virtual local area network index for this bundle."
::= { port2-configE1BundleEntry 9 }
port2-configE1BundleCoS OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS optional
DESCRIPTION
"Class of Service (CoS) is a 3 bit field within a layer two Ethernet frame
header when using IEEE 802.1Q. It specifies a priority value of between 0
(signifying best-effort) and 7 (signifying priority real-time data) that
can be used by Quality of Service disciplines to differentiate traffic."
::= { port2-configE1BundleEntry 10 }
port2-configE1BundleIPToS OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS optional
DESCRIPTION
"Internet Protocol Type of Service (IPToS) field of IP header for this bundle"
::= { port2-configE1BundleEntry 11 }
--*************************************
-- third port bundle table
--*************************************
port3-configE1BundleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Port3-ConfigE1BundleEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A list of E1 Bundles for Port3. Each consists of an bundle ID, external
bundle ID, frame size, jitter bufer size, jitter buffer data level,
destination IP address, timeslots."
::= { ConfigE1Bundle 3 }
port3-configE1BundleEntry OBJECT-TYPE
SYNTAX Port3-ConfigE1BundleEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "Bundles Configuration."
INDEX { ifIndex }
::= { port3-configE1BundleTable 1 }
Port3-ConfigE1BundleEntry ::= SEQUENCE {
port3-configE1BundleId INTEGER,
port3-configE1BundleState INTEGER,
port3-configE1BundleExtId INTEGER,
port3-configE1BundleFrameSize INTEGER,
port3-configE1BundleJBufSize INTEGER,
port3-configE1BundleJBufDataLev INTEGER,
port3-configE1BundleDstIP IpAddress,
port3-configE1BundleTimeslot OCTET STRING,
port3-configE1BundleVID INTEGER,
port3-configE1BundleCoS INTEGER,
port3-configE1BundleIPToS INTEGER
}
port3-configE1BundleId OBJECT-TYPE
SYNTAX INTEGER (32..47)
ACCESS read-only
STATUS optional
DESCRIPTION
"Specific number designated a bundle on the Ethernet Side."
::= { port3-configE1BundleEntry 1 }
port3-configE1BundleState OBJECT-TYPE
SYNTAX INTEGER {
Close(0),
Open(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The bundle state (open or close)."
::= { port3-configE1BundleEntry 2 }
port3-configE1BundleExtId OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-only
STATUS optional
DESCRIPTION
"External bundle ID.
Specific identifier of a destination bundle."
::= { port3-configE1BundleEntry 3 }
port3-configE1BundleFrameSize OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS optional
DESCRIPTION
"TDM bytes in frame is equal this value to multiply by 48."
::= { port3-configE1BundleEntry 4 }
port3-configE1BundleJBufSize OBJECT-TYPE
SYNTAX INTEGER (1..512)
ACCESS read-only
STATUS optional
DESCRIPTION
"Jitter buffer size.
TDMoIP is equipped with a jitter buffer. The jitter buffer is filled by
the incoming IP packets and emptied out to fill the E1 stream. The buffer
begins to empty out only after it is half-full in order to compensate for
packet starvation from the Ethernet side. The time it takes for half of
the buffer to empty out is the Jitter Buffer Size."
::= { port3-configE1BundleEntry 5 }
port3-configE1BundleJBufDataLev OBJECT-TYPE
SYNTAX INTEGER (1..512)
ACCESS read-only
STATUS optional
DESCRIPTION
"Jitter buffr data level.
Packets are transmitted at set intervals. Jitter Buffer Data Level is the
maximum deviation from the nominal time the packets are expected to arrive
at the far end device."
::= { port3-configE1BundleEntry 6 }
port3-configE1BundleDstIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS optional
DESCRIPTION
"Destination IP address.
IP address of the destination device."
::= { port3-configE1BundleEntry 7 }
port3-configE1BundleTimeslot OBJECT-TYPE
SYNTAX DisplayString (SIZE(128))
ACCESS read-only
STATUS optional
DESCRIPTION
"Time slots is assigned to a bundle."
::= { port3-configE1BundleEntry 8 }
port3-configE1BundleVID OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS optional
DESCRIPTION
"Virtual local area network index for this bundle."
::= { port3-configE1BundleEntry 9 }
port3-configE1BundleCoS OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS optional
DESCRIPTION
"Class of Service (CoS) is a 3 bit field within a layer two Ethernet frame
header when using IEEE 802.1Q. It specifies a priority value of between 0
(signifying best-effort) and 7 (signifying priority real-time data) that
can be used by Quality of Service disciplines to differentiate traffic."
::= { port3-configE1BundleEntry 10 }
port3-configE1BundleIPToS OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS optional
DESCRIPTION
"Internet Protocol Type of Service (IPToS) field of IP header for this bundle"
::= { port3-configE1BundleEntry 11 }
--*************************************
-- fourth port bundle table
--*************************************
port4-configE1BundleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Port4-ConfigE1BundleEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A list of E1 Bundles for Port4. Each consists of an bundle ID, external bundle ID,
frame size, jitter bufer size, jitter buffer data level,
destination IP address, timeslots."
::= { ConfigE1Bundle 4 }
port4-configE1BundleEntry OBJECT-TYPE
SYNTAX Port4-ConfigE1BundleEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION "Bundles Configuration."
INDEX { ifIndex }
::= { port4-configE1BundleTable 1 }
Port4-ConfigE1BundleEntry ::= SEQUENCE {
port4-configE1BundleId INTEGER,
port4-configE1BundleState INTEGER,
port4-configE1BundleExtId INTEGER,
port4-configE1BundleFrameSize INTEGER,
port4-configE1BundleJBufSize INTEGER,
port4-configE1BundleJBufDataLev INTEGER,
port4-configE1BundleDstIP IpAddress,
port4-configE1BundleTimeslot OCTET STRING,
port4-configE1BundleVID INTEGER,
port4-configE1BundleCoS INTEGER,
port4-configE1BundleIPToS INTEGER
}
port4-configE1BundleId OBJECT-TYPE
SYNTAX INTEGER (48..63)
ACCESS read-only
STATUS optional
DESCRIPTION
"Specific number designated a bundle on the Ethernet Side."
::= { port4-configE1BundleEntry 1 }
port4-configE1BundleState OBJECT-TYPE
SYNTAX INTEGER {
Close(0),
Open(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The bundle state (open or close)."
::= { port4-configE1BundleEntry 2 }
port4-configE1BundleExtId OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-only
STATUS optional
DESCRIPTION
"External bundle ID.
Specific identifier of a destination bundle."
::= { port4-configE1BundleEntry 3 }
port4-configE1BundleFrameSize OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-only
STATUS optional
DESCRIPTION
"TDM bytes in frame is equal this value to multiply by 48."
::= { port4-configE1BundleEntry 4 }
port4-configE1BundleJBufSize OBJECT-TYPE
SYNTAX INTEGER (1..512)
ACCESS read-only
STATUS optional
DESCRIPTION
"Jitter buffer size.
TDMoIP is equipped with a jitter buffer. The jitter buffer is filled by
the incoming IP packets and emptied out to fill the E1 stream. The buffer
begins to empty out only after it is half-full in order to compensate for
packet starvation from the Ethernet side. The time it takes for half of
the buffer to empty out is the Jitter Buffer Size."
::= { port4-configE1BundleEntry 5 }
port4-configE1BundleJBufDataLev OBJECT-TYPE
SYNTAX INTEGER (1..512)
ACCESS read-only
STATUS optional
DESCRIPTION
"Jitter buffr data level.
Packets are transmitted at set intervals. Jitter Buffer Data Level is the
maximum deviation from the nominal time the packets are expected to arrive
at the far end device."
::= { port4-configE1BundleEntry 6 }
port4-configE1BundleDstIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS optional
DESCRIPTION
"Destination IP address.
IP address of the destination device."
::= { port4-configE1BundleEntry 7 }
port4-configE1BundleTimeslot OBJECT-TYPE
SYNTAX DisplayString (SIZE(128))
ACCESS read-only
STATUS optional
DESCRIPTION
"Time slots is assigned to a bundle."
::= { port4-configE1BundleEntry 8 }
port4-configE1BundleVID OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS optional
DESCRIPTION
"Virtual local area network index for this bundle."
::= { port4-configE1BundleEntry 9 }
port4-configE1BundleCoS OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS optional
DESCRIPTION
"Class of Service (CoS) is a 3 bit field within a layer two Ethernet frame
header when using IEEE 802.1Q. It specifies a priority value of between 0
(signifying best-effort) and 7 (signifying priority real-time data) that
can be used by Quality of Service disciplines to differentiate traffic."
::= { port4-configE1BundleEntry 10 }
port4-configE1BundleIPToS OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS optional
DESCRIPTION
"Internet Protocol Type of Service (IPToS) field of IP header for this bundle"
::= { port4-configE1BundleEntry 11 }
--**************************************************************************************************
-- C o n f i g E t h s e c t i o n
--**************************************************************************************************
configEthIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS optional
DESCRIPTION
"IP address of the management interface (ethernet)."
::= { ConfigEth 1 }
configEthNetmask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS optional
DESCRIPTION
"Subnet mask of the management interface (ethernet)."
::= { ConfigEth 2 }
configEthGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS optional
DESCRIPTION
"Default Gateway for the management interface (ethernet)."
::= { ConfigEth 3 }
--**************************************************************************************************
-- C o n f i g R S 2 3 2 s e c t i o n
--**************************************************************************************************
configRSChTable OBJECT-TYPE
SYNTAX SEQUENCE OF ConfigRSChEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A list of RS232 channel. Each consists of an identifier, activity,
assigned timeslot, speed, bit count, parity, stop bit."
::= { ConfigRS232 1 }
configRSChEntry OBJECT-TYPE
SYNTAX ConfigRSChEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"RS232 Channels Configuration."
INDEX { configRSChId }
::= { configRSChTable 1 }
ConfigRSChEntry ::=
SEQUENCE {
configRSChId INTEGER,
configRSChActivity INTEGER,
configRSChTimeslot INTEGER,
configRSChSpeed INTEGER,
configRSChBitCount INTEGER,
configRSChParity INTEGER,
configRSChStopBit INTEGER
}
configRSChId OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique index of RS232 channel."
::= { configRSChEntry 1 }
configRSChActivity OBJECT-TYPE
SYNTAX INTEGER {
Off(0),
On(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"."
::= { configRSChEntry 2 }
configRSChTimeslot OBJECT-TYPE
SYNTAX INTEGER (1..31)
ACCESS read-only
STATUS optional
DESCRIPTION
"."
::= { configRSChEntry 3 }
configRSChSpeed OBJECT-TYPE
SYNTAX INTEGER {
1200bps(1),
2400bps(2),
4800bps(3),
9600bps(4),
19200bps(5),
38400bps(6),
57600bps(7)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"."
::= { configRSChEntry 4 }
configRSChBitCount OBJECT-TYPE
SYNTAX INTEGER {
8bit(0),
7bit(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"."
::= { configRSChEntry 5 }
configRSChParity OBJECT-TYPE
SYNTAX INTEGER {
None(0),
Even(2),
Odd(3)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"."
::= { configRSChEntry 6 }
configRSChStopBit OBJECT-TYPE
SYNTAX INTEGER {
One(0),
One-and-a-half(1),
Two(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"."
::= { configRSChEntry 7 }
--**************************************************************************************************
--*** ***
--*** F l e x G a i n - T D M o I P T r a p s S e c t i o n ***
--*** ***
--**************************************************************************************************
E1SIGLOSS_PORT1 TRAP-TYPE
ENTERPRISE FlexGain-TDMoIP-TrapMgt
--VARIABLES { configE1PortId }
DESCRIPTION " Signal loss condition has been detected at first port of E1 interface "
::= 10
E1SIGLOSS_PORT2 TRAP-TYPE
ENTERPRISE FlexGain-TDMoIP-TrapMgt
--VARIABLES { configE1PortId }
DESCRIPTION " Signal loss condition has been detected at second port of E1 interface "
::= 11
E1SIGLOSS_PORT3 TRAP-TYPE
ENTERPRISE FlexGain-TDMoIP-TrapMgt
--VARIABLES { configE1PortId }
DESCRIPTION " Signal loss condition has been detected at third port of E1 interface "
::= 12
E1SIGLOSS_PORT4 TRAP-TYPE
ENTERPRISE FlexGain-TDMoIP-TrapMgt
--VARIABLES { configE1PortId }
DESCRIPTION " Signal loss condition has been detected at fourth port of E1 interface "
::= 13
E1LINKUP_PORT1 TRAP-TYPE
ENTERPRISE FlexGain-TDMoIP-TrapMgt
--VARIABLES { configE1PortId }
DESCRIPTION " An E1 connection has been estabished at first port of E1 interface "
::= 14
E1LINKUP_PORT2 TRAP-TYPE
ENTERPRISE FlexGain-TDMoIP-TrapMgt
--VARIABLES { configE1PortId }
DESCRIPTION " An E1 connection has been estabished at second port of E1 interface "
::= 15
E1LINKUP_PORT3 TRAP-TYPE
ENTERPRISE FlexGain-TDMoIP-TrapMgt
--VARIABLES { configE1PortId }
DESCRIPTION " An E1 connection has been estabished at third port of E1 interface "
::= 16
E1LINKUP_PORT4 TRAP-TYPE
ENTERPRISE FlexGain-TDMoIP-TrapMgt
--VARIABLES { configE1PortId }
DESCRIPTION " An E1 connection has been estabished at fourth port of E1 interface "
::= 17
--ETHCONFIGCHANGE TRAP-TYPE
-- ENTERPRISE FlexGain-TDMoIP-TrapMgt
-- VARIABLES { configE1PortId }
-- DESCRIPTION
-- " Ethernet (management) interface settings have been changed. "
-- ::= 10
--
--TDMOIPCONFIGCHANGE TRAP-TYPE
-- ENTERPRISE FlexGain-TDMoIP-TrapMgt
-- VARIABLES { configE1PortId }
-- DESCRIPTION
-- " TDMoIP interface settings have been changed. "
-- ::= 11
--
--RS232CONFIGCHANGE TRAP-TYPE
-- ENTERPRISE FlexGain-TDMoIP-TrapMgt
-- VARIABLES { configE1PortId }
-- DESCRIPTION
-- " RS232 channels settings have been changed. "
-- ::= 12
--
--E1PORTCONFIGCHANGE TRAP-TYPE
-- ENTERPRISE FlexGain-TDMoIP-TrapMgt
-- VARIABLES { configE1PortId }
-- DESCRIPTION
-- " E1 Port configuration has been changed. "
-- ::= 13
--
--E1BNDLCONFIGCHANGE TRAP-TYPE
-- ENTERPRISE FlexGain-TDMoIP-TrapMgt
-- VARIABLES { configE1PortId }
-- DESCRIPTION
-- " E1 Bundle creating/deleting alarm occured. "
-- ::= 14
END
Last change on Jan 20, 2016 11:30:54 AM by
Add comment