Is there a Sensor in development to Monitor Fujitsu Servers with SNMP in analogy to (for example) the SNMP IBM System X Sensors?
Monitoring Status of Fujitsu Servers
Votes:
0
Best Answer
Accepted Answer
Votes:
0
This article applies to PRTG Network Monitor 18 or later
Monitoring Fujitsu PRIMERGY Servers with PRTG
As of PRTG Network Monitor version 18.2.40, you can now monitor your Fujitsu PRIMERGY servers via the integrated Remote Management Controller (iRMC) and SNMP out of the box! PRTG version 18.2.40 includes a new sensor type that shows you important information about your Fujitsu PRIMERGY servers.
The new SNMP Fujitsu System Health Sensor can show you the overall status, CPU status, memory module status, power consumption status, temperatures of various components, and more.
The sensor might also work on other Fujitsu devices that have an iRMC available like PRIMEQUEST servers, some storage systems of the ETERNUS product line, and CELSIUS workstations in racks.
Note: This sensor type is in beta status and may be subject to change at any time.
Created on May 24, 2018 6:32:25 AM by
2 Replies
Votes:
0
Hi,
no, at the moment there is no dedicated sensor for Fujitsu servers planned or in development. Sorry.
You might check with the vendor whether they are offering MIB files and then import the same for the usage in PRTG using the MIB Importer.
Best regards
Created on Nov 25, 2013 7:02:18 AM by
Accepted Answer
Votes:
0
This article applies to PRTG Network Monitor 18 or later
Monitoring Fujitsu PRIMERGY Servers with PRTG
As of PRTG Network Monitor version 18.2.40, you can now monitor your Fujitsu PRIMERGY servers via the integrated Remote Management Controller (iRMC) and SNMP out of the box! PRTG version 18.2.40 includes a new sensor type that shows you important information about your Fujitsu PRIMERGY servers.
The new SNMP Fujitsu System Health Sensor can show you the overall status, CPU status, memory module status, power consumption status, temperatures of various components, and more.
The sensor might also work on other Fujitsu devices that have an iRMC available like PRIMEQUEST servers, some storage systems of the ETERNUS product line, and CELSIUS workstations in racks.
Note: This sensor type is in beta status and may be subject to change at any time.
Created on May 24, 2018 6:32:25 AM by
Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
Add comment