What is this?

This knowledgebase contains questions and answers about PRTG Network Monitor and network monitoring in general.

Learn more

PRTG Network Monitor

Intuitive to Use. Easy to manage.
More than 500,000 users rely on Paessler PRTG every day. Find out how you can reduce cost, increase QoS and ease planning, as well.

Free Download

Top Tags


View all Tags

How can I monitor EMC Isilon storage systems with PRTG?

Votes:

0

I would like to monitor my EMC Isilon NAS with PRTG but there are no native sensors for EMC Isilon. How can I set up Isilon monitoring with PRTG nevertheless?

emc isilon mib nas oidlib prtg snmp snmp-library

Created on Sep 26, 2016 4:45:20 PM by  Gerald Schoch [Paessler Support]



1 Reply

Accepted Answer

Votes:

0

This article applies as of PRTG 22

Monitoring EMC Isilon storages with PRTG

Out of the box, PRTG includes a broad variety of sensors for storage systems and other hardware. For other device types, like EMC Isilon storage systems, you have the possibility to create custom sensors. For example, if the device that you want to monitor supports SNMP, you can try to get an MIB file from the vendor, convert it with MIB Importer into an .oidlib file for PRTG, and use it with the SNMP Library sensor.

For more information, see the following articles:

SNMP Library sensor for EMC Isilon

One of our customers created two OIDlibs and one lookup file to monitor EMC Isilon storages with the SNMP Library sensor. We are thankful that he provided us with the files to share them with all PRTG customers.

Follow the steps below to set up your EMC Isilon monitoring.

Steps to take

  1. Download EMC Isilon OIDlibs.zip.
  2. Copy both .oidlib files into the \snmplibs subfolder of the PRTG data directory.
    • EMC_Isilon_Cluster_2016_08_18.oidlib contains the OIDs for the cluster (SmartConnect IP).
    • EMC_Isilon_Nodes_2016_08_18.oidlib contains the OIDs for the single nodes (Node-IP).
  3. Copy the lookup file oid.isilon-mib.multiple.clusterhealth-nodehealth.ovl into the \lookups subfolder of the PRTG data directory. This is the lookup definition for the health status of the cluster and all nodes.
  4. Reload the lookup files in the PRTG web interface.
    • From the main menu bar, select Setup | System Administration | Administrative Tools.
    • In section Load Lookups and File Lists, click Go!.
  5. Add SNMP Library sensors using the OIDlibs you have downloaded and extracted.

Notes

EMC Isilon OIDlibs.zip has been provided by PRTG user Steffen Ille. He also did some improvements in comparison to the original MIB for a better monitoring experience, and successfully tested the OIDlibs on Isilon OneFS 7.2.x and PRTG 16.3.25.

Thank you very much for your efforts, Steffen Ille! See also this case study (German only) if you are interested in where and how these OID libraries are used in production.

Note that we cannot provide any support for these custom OIDlibs, nor can we guarantee that they work as expected.

Created on Sep 26, 2016 4:51:55 PM by  Gerald Schoch [Paessler Support]

Last change on Jan 4, 2023 2:43:54 PM by  Brandy Greger [Paessler Support]




Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.