Hello konaprocess,
For your request you´ll need three different notifications, each of them provoked by a separate threshold trigger.
To do so the following steps needs to be done:
- 1) Add a notification
- 1.1) Please navigate to "Setup >> Account Settings >> Notifications"
- 1.2) Click on "Add new notification"
- 1.3) Under "Method", please choose "Always notify ASAP, never summarize"
- 1.4) Please activate the option "Send Email"
- 1.5a) Either add several comma separated addresses in the "Send to Email Address"-field
- 1.5b) Or choose an existing User/User Group from the drop down menus.
- 1.6) Edit the Subject with e.g. "WARNING!!!!!! DANGER!!!!" or "MAINTENANCE NEEDED NOW!!!!"
- 1.7) Define the priority for the email
- 1.8) Save the notification
- (1.9) Repeat Steps 1.2) - 1.8) for each notification)
For further details, please refer to: https://www.paessler.com/manuals/prtg/notifications_settings#email
- 2) Add a threshold-trigger
- 2.1) Please navigate to your "Disk free"-Sensor
- 2.2) Switch to tab "Notifications"
- 2.3) Click on "Add Threshold Trigger"
- 2.4) Please set the values which should reached to trigger the notification (e.g. "Free Bytes in %" is below "30" for at least "0" seconds perform "3Admins_Notification")
- 2.5) Save the state-trigger
- (2.6) Repeat Steps 2.3) - 2.5) for each trigger)
For further details, please refer to: https://www.paessler.com/manuals/prtg/sensor_notifications_settings#threshold
If you have any further questions, please do not hesitate to contact us.
With kind regards,
Sven
Add comment