What is this?

This knowledgebase contains questions and answers about PRTG Network Monitor and network monitoring in general.

Learn more

PRTG Network Monitor

Intuitive to Use. Easy to manage.
More than 500,000 users rely on Paessler PRTG every day. Find out how you can reduce cost, increase QoS and ease planning, as well.

Free Download

Top Tags


View all Tags

IBM System X sensors could not find any disk/data on this device (PE187/PE188/PE194)

Votes:

0

I am using an IBM System x server and when I try to add any of the IBM-specific sensors, I get one of the following errors:

SensorError Message
SNMP IBM System X Logical DiskThe sensor could not find any disks on the monitored device. The reason might be a Windows security feature that prevents automatic integration of the Windows SNMP agent with the components from IBM. To resolve this issue, see https://kb.paessler.com/en/topic/73914. (code: PE188)
SNMP IBM System X Physical DiskThe sensor could not find any disks on the monitored device. The reason might be a Windows security feature that prevents automatic integration of the Windows SNMP agent with the components from IBM. To resolve this issue, see https://kb.paessler.com/en/topic/73914. (code: PE188)
SNMP IBM System X Physical MemoryThe sensor could not find any matching data on the target device. To resolve this issue, check if the target device meets the requirements and if the required OIDs are reachable. (code: PE187)
SNMP IBM System X System HealthThe sensor could not find any IBM system health metrics on the monitored device. The reason might be a Windows security feature that prevents automatic integration of the Windows SNMP agent with the components from IBM. To resolve this issue, see https://kb.paessler.com/en/topic/73914. (code: PE194)

The IBM Systems Director platform is installed and configured but I am still unable to deploy any specific sensors. Other SNMP sensors are working.

error-messages ibm ibm-system-x pe187 pe188 pe194 prtg snmp

Created on Apr 3, 2017 8:05:30 AM by Luciano Lingnau [Paessler]

Last change on Nov 21, 2023 10:28:42 AM by Yasodhara Das [Paessler Support]



1 Reply

Accepted Answer

Votes:

0

This article applies as of PRTG 22

Finding disks with SNMP IBM System X sensors

If your SNMP IBM System X sensors cannot find any disks, first try using our free SNMP Tester to see if SNMP is enabled on the System x device. You should be able to read the uptime if SNMP is working.

Also, once you have confirmed that SNMP is working, you can use the tester to do a walk on the following OIDs to check if the required data is available:

SensorBase OID
SNMP IBM System X Logical Disk1.3.6.1.4.1.2.6.159.3.5
SNMP IBM System X Physical Disk1.3.6.1.4.1.2.6.159.3.4
SNMP IBM System X Physical Memory1.3.6.1.4.1.2.6.159.1.1.2120.1
SNMP IBM System X System Health1.3.6.1.4.1.2.6.159.1.1

The sensors only work if these queries provide a response.

IBM System X sensors on Windows Server 2012 R2

Note: As of October 2023, PRTG no longer supports Windows Server 2012 R2. We recommend you use the most recent version of Windows Server.

According to IBM, a security feature in Windows Server 2012 R2 prevents automatic integration of the Windows SNMP agent with the components from IBM. This leads to the data being unavailable when the agent is polled. The following IBM Systems Director software versions are officially affected:

  • 6.3.7
  • 6.3.6
  • 6.3.5

Also, make sure that you have checked all of the sensor's remarks.

Created on Apr 3, 2017 8:09:33 AM by Luciano Lingnau [Paessler]

Last change on Nov 21, 2023 10:29:32 AM by Yasodhara Das [Paessler Support]




Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.