New Question
 
 
PRTG Network Monitor

Intuitive to Use.
Easy to manage.

200.000 administrators have chosen PRTG to monitor their network. Find out how you can reduce cost, increase QoS and ease planning, as well.

Free PRTG
Download >>

 

What is this?

This knowledgebase contains questions and answers about PRTG Network Monitor and network monitoring in general. You are invited to get involved by asking and answering questions!

Learn more

 

Top Tags


View all Tags


Network latency sensor for Softlayer VPN

Votes:

0

Your Vote:

Up

Down

Hello,

Is it possible to monitor network latency sensor for vpn.dal01.xxxxxx.com [173.192.255.xxx] & vpn.dal09.xxxxxx.com [198.23.127.yyy]

C:\Users\PRTG>ping vpn.dal01.xxxxxx.com

Pinging vpn.dal01.xxxxxx.com [173.192.255.xxx] with 32 bytes of data:
Reply from 173.192.255.xxx: bytes=32 time=343ms TTL=52
Reply from 173.192.255.xxx: bytes=32 time=335ms TTL=52
Request timed out.
Reply from 173.192.255.xxx: bytes=32 time=331ms TTL=52

Ping statistics for 173.192.255.xxx:
    Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
Approximate round trip times in milli-seconds:
    Minimum = 331ms, Maximum = 343ms, Average = 336ms
C:\Users\PRTG>ping vpn.dal09.xxxxxx.com

Pinging vpn.dal09.xxxxxx.com [198.23.127.yyy] with 32 bytes of data:
Reply from 198.23.127.yyy: bytes=32 time=333ms TTL=53
Request timed out.
Reply from 198.23.127.yyy: bytes=32 time=331ms TTL=53
Request timed out.

Ping statistics for 198.23.127.yyy:
    Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
    Minimum = 331ms, Maximum = 333ms, Average = 332ms

Thanks.

network-latency softlayer vpn

Created on Jan 17, 2018 5:23:22 PM by  ramkumarj (60) 1 1

Last change on Jan 18, 2018 2:20:49 PM by  Sven Roggenhofer [Paessler Technical Support]



2 Replies

Votes:

0

Your Vote:

Up

Down

Hello ramkuari,

Thank you for your KB-post.

Please add two devices to PRTG, one for vpn.dal01.xxxxxx.com [173.192.255.xxx] and one for vpn.dal09.xxxxxx.com [198.23.127.yyy].

Once you have done this, simply add a PING-Sensor to each device and you're done.

Best regards,
Sven

Created on Jan 18, 2018 2:24:03 PM by  Sven Roggenhofer [Paessler Technical Support]



Votes:

0

Your Vote:

Up

Down

Hello,

Thanks for the update. It worked :)

Thanks.

Created on Jan 18, 2018 3:08:22 PM by  ramkumarj (60) 1 1



Please log in or register to enter your reply.


Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.