I have an SNMP traffic sensor which seems to be reporting the IN/OUT data in reverse of how it is flowing. Is there any way to reverse the sensor? I know I can create another custom sensor but that is just burning another sensor (which I don't have many of) to report the same data?
Traffic Senor Inverted
Votes:
0
1 Reply
Votes:
0
The sensor can only be inverted via the Sensor Factory sensor. You could also use a SNMP Custom Advanced sensor, but it lacks some advantages of the SNMP Traffic sensor, such as automatic renaming. The following OIDs are to be used:
32bit
| 1.3.6.1.2.1.2.2.1.10. | in traffic |
|---|---|
| 1.3.6.1.2.1.2.2.1.16. | out traffic |
| 1.3.6.1.2.1.2.2.1.11. | in unicast |
| 1.3.6.1.2.1.2.2.1.17. | out unicast |
| 1.3.6.1.2.1.2.2.1.12. | in non unicast |
| 1.3.6.1.2.1.2.2.1.18. | out non unicast |
64bit
| 1.3.6.1.2.1.31.1.1.1.6. | in traffic |
|---|---|
| 1.3.6.1.2.1.31.1.1.1.10. | out traffic |
| 1.3.6.1.2.1.31.1.1.1.7. | in unicast |
| 1.3.6.1.2.1.31.1.1.1.11. | out unicast |
| 1.3.6.1.2.1.31.1.1.1.8. | in multicast |
| 1.3.6.1.2.1.31.1.1.1.12. | out multicast |
| 1.3.6.1.2.1.31.1.1.1.9. | in broadcast |
| 1.3.6.1.2.1.31.1.1.1.13. | out broadcast |
Kind regards,
Stephan Linke, Tech Support Team
Created on Jun 27, 2018 9:50:50 AM by
Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
Add comment