What is this?

This knowledgebase contains questions and answers about PRTG Network Monitor and network monitoring in general. You are invited to get involved by asking and answering questions!

Learn more

PRTG Network Monitor

Intuitive to Use. Easy to manage.
300.000 administrators have chosen PRTG to monitor their network. Find out how you can reduce cost, increase QoS and ease planning, as well.

Free Download

Top Tags

View all Tags

I want to know which of my systems support the Redfish System Health sensor. Can you help me?



Your Vote:



With the latest release you introduced the Redfish System Health sensor. Which vendors support Redfish?

api industrial-it prtg redfish rest systemhealth

Created on Aug 17, 2021 9:16:12 AM by  Florian Weik [Paessler Support]

1 Reply

Accepted Answer



Your Vote:



This article applies as of PRTG 21

What is the Redfish standard and which vendors support it?

With PRTG 21.3.70, we introduced the Redfish System Health sensor. This is the first sensor of our new Redfish sensor series in PRTG.

Redfish Scalable Platforms Management API (Redfish)

The Redfish standard was developed in 2014 as a replacement for IPMI. Redfish provides a RESTful interface for server, network, and storage management, for example in industrial IT environments. Many vendors support the Redfish standard. If you want to know if your systems support Redfish, we recommend that you refer to the respective vendor documentation.

Here are some examples for servers that support Redfish:

ServerRequirements (minimum firmware version)
Cisco Integrated Management Controller (IMC)IMC software 3.0
Dell iDRAC BMC• iDRAC 7: firmware
• iDRAC 8: firmware
• iDRAC 9: firmware
Fujitsu iRMC• iRMC S4: firmware 9.0x
• iRMC S5: firmware 1.0
HPE iLO BMC• iLO 4 2.30
• iLO 5
HPE Moonshot BMCFirmware version 1.41
IBM Power Systems BMCOpenPOWER (OP) firmware level OP940
IBM Power Systems Flexible Service Processor (FSP)Firmware version FW860.20
Lenovo XClarity Controller (XCC) BMCXCC firmware 1.00
Supermicro BMC• X10: FW 3.0
• X11: FW 1.0

Created on Aug 17, 2021 9:49:03 AM by  Florian Weik [Paessler Support]

Last change on Aug 18, 2021 10:13:41 AM by  Florian Weik [Paessler Support]

Please log in or register to enter your reply.

Disclaimer: The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.